www.bitechnologies.com magnetic components selector guide 2006 edition we reserve the right to change specifications without prior notice. 40 hm69-10r025 25 18 25 0.27 0.33 42 22 3.847e-14 59.444 HM69-20R050 50 28 36 0.20 0.24 70 35 1.074e-13 50.117 hm69-30r070 70 50 67 0.40 0.48 46 25 1.074e-13 70.164 hm69-40r10 100 60 75 0.31 0.39 28 25 7.124e-14 156.891 hm69-50r10 100 72 95 0.40 0.48 29 24 8.733e-14 127.990 hm69-50r15 150 96 120 0.40 0.48 18 24 8.733e-14 191.986 hm69-55r10 100 64 80 0.45 0.56 45 25 1.337e-13 96.541 hm69-55r20 200 140 175 0.45 0.56 21 25 1.337e-13 160.902 hm69-60r10 100 69 87 0.42 0.50 68 31 2.311e-13 52.336 hm69-60r15 150 104 130 0.42 0.50 48 31 2.311e-13 78.503 hm69-60r20 200 144 180 0.42 0.50 31 31 2.311e-13 104.671 hm69-70r30 300 200 250 0.17 0.20 37 70 6.784e-13 98.921 hm69-75r20 200 150 175 0.40 0.50 20 40 3.559e-13 134.203 hm69-80r3 0 300 216 285 0.17 0.25 40 76 9.107e-13 72.674 specifications ? operating temperature range -40c to +125c ? temperature rise, maximum 4 0 c ? ambient temperature, maximum 80c ? insulation system class f, 1 55 c ??? ? electrical / environmental high current low profile surface m ount inductors rohs compliant for lf models notes: (1) dc resistance is measured at 25c. (2) the rated current (i rated ) is the current at which the inductance will be decreased by 20% from its initial (zero dc) value. (3) the heating current is the dc current, which causes the component temperature to increase by approximately 40c. this current is determined by soldering the component on a typical application pcb, and then apply the device for 30 minutes. (4) core loss approximation is based on published core data: core loss = k1 * (f) 1.77 * (k2 ? i) 2.21 where: core loss in watt f = switching frequency in khz k1 and k2 = core loss factor ? i = delta i across the component in amp. k2 ? i = one half of the peak to peak flux density across the component in gauss packaging standard : embossed tape & reel reel: diameter: = 13 (330.2mm) capacity: case size 10,40 = 1000 units case size 20,30,60 = 800 units case size 50,55, 75 = 500 units case size 70, 80 = 350 units ordering information inductance code: first 2 digits are signi?cant. last digit denotes the number of trailing zeros. for values below 10 h, r denotes the decimal point. case size model series tape & reel packing lead-free option lf = lead-free (no code used for non lead-free part) hm6 9 50 r10 lf tr i n ductance 10 0khz, 0.1v @ 0 adc @ i rated dcr (1) i rated (2) heating core loss (4) part ( n h 20%) ( n h) (m ? ) @ 25c current (3) factor number typ. min. typ. typ. max. (adc) (a) k1 k2
2006 edition magnetic components selector guide we reserve the right to change specifications without prior notice www.bitechnologies.com 41 outline dimensions (mm) recommended solder pad layout top view bottom view electrical characteristics @ 25 c
www.bitechnologies.com magnetic components selector guide 2006 edition we reserve the right to change specifications without prior notice. 42 electrical characteristics @ 25 c (con td)
|
